Rack & Pinion Dual Steering Cable - 25 ft. SSC13525

Description

Twin rack cables fit SH5210p, SH5230P, SH91610P, and SH91630P helms. Order that length cable. If you removed the old cable, measure for the replacement cable as follows:For Rack Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30′′, and round up to next. How to Measure Steering Cables "Measure Twice. If you removed the old cable, measure for the replacement cable as follows:For Rack Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30′′, and. For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6′′ and round up to the next foot. Steering Cable SSC135Teleflex dual rack and pinion steering cables are specifically engineered for high-performance boaters wanting No Feedback technology. New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at. For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6′′, then round up to the next foot. Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point. Cable routings (such as those found on pontoon boats) may vary from this drawing.

Key Features

• If you removed the old cable, measure for the replacement cable as follows:For Rack Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30′′, and.
• Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point.
• New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at.
• This replacement Teleflex dual rack and pinion steering cable generally installs with no dash alteration and will provide years of performance for boats equipped with a non-power assisted outboard.
• Twin rack cables fit SH5210p, SH5230P, SH91610P, and SH91630P helms.
• Order Once." Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable.