Interlux Nautical Enamel - Gallon NAU130-1

Description

Nautical Enamels are one-part professional quality interior and exterior alkyd enamels. Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water. If the surface is in poor condition and to achieve optimal results, use a primer approved for alkyd topside paints as per manufacturer's instructions. Clear Epoxy Nautical Enamel cannot be applied directly to clear epoxy. Nautical Enamels are available in a high gloss, semi gloss and flat finish and can be applied to any properly prepared fiberglass, metal or wood surfaces above the waterline, inside or out. Fill any surface imperfections with approved filler for topside paint use. Previously Painted Surface Poor Condition Completely remove old paint. Do not apply Nautical Enamel directly to bare metal. Cleaner Mineral Spirits or Naphtha Thinning: Do not thin Ventilation and Humidity Control Apply in dry, well ventilated conditions, Avoid excessively humid conditions, over 80% relative humidity. After all old paint has been removed, follow preparation instructions for bare fiberglass. - Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water. Metals Apply a metal primer approved for alkyd topside paints as per manufacturer's instructions. HOW TO APPLY INTERLUX NAUTICAL ENAMEL Mixing Stir well before and during use. Pressure adjust as needed. After all old paint has been removed, follow preparation instructions for bare fiberglass. Clear epoxy when.

Key Features

• Economically priced and formulated to provide performance, value and reliability these finishes are durable and offers toughness, chemical resistance and hide and wear characteristics.
• Nautical Enamels are available in a high gloss, semi gloss and flat finish and can be applied to any properly prepared fiberglass, metal or wood surfaces above the waterline, inside or out.
• HOW TO APPLY INTERLUX NAUTICAL ENAMEL Mixing Stir well before and during use.
• After all old paint has been removed, follow preparation instructions for bare fiberglass. - Bare Wood Scrub the surface thoroughly with a stiff brush using soap and water.
• Flush with fresh water to remove the soap residue and allow surface to dry.
• Brush Natural bristle brush Roller Use a solvent resistant small closed cell foam roller Airless Spray: Tip Size: 0.33 mm/13 thou.