Awlgrip Polyester Urethane Topcoat Base - Snow White High Gloss - Quart G8044

Description

Allow tack coat to "flash off" 30 to 45 minutes. Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***. Reduce 25-33% with T0031. Regardless of application method 2 coats is the minimum. Surface Preparation Awlgrip colors should be applied over properly prepared 545 primer or in brush/roller applications Awl-Quik primer. For years, serious boat owners have demanded Awlgrip coatings systems to protect their valuable investments from harsh marine elements. Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended. Then apply a full, wet coat to achieve color coverage and film thickness requirements. Awl-grip high gloss G3005 can be applied over dark colors which have been sanded with 320-400 grit paper. Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun. Overall mix is 1:1 1/2 by volume. Application Instructions General: Sanded surface must be dry and clean. Sanding between coats with 280 to 400 grit paper will provide a smoother finish. Smooth sanding until all of the guide coat is removed yields a texture free surface. Roller/Brush Mix 2 parts Awlgrip Topcoat Base Component with one part Awl Cat #3/H3002 brushing converter until one smooth homogenous mixture is obtained. 40% is maximum.

Key Features

• Allow tack coat to "flash off" 30 to 45 minutes.
• Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat.
• Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***.
• Do not apply 3005 over white or pastel colors, or to bare wood.
• Sanding between coats with 280 to 400 grit paper will provide a smoother finish.
• Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun.