Awlgrip G8010Q; Off-White (Lf)-Quart

Description

Awlgrip High Gloss Clear G3005 can be applied over dark Awlgrip colors which have been sanded with 320-400 grit paper. Brush/Roller applications require at least two coats. Color Chart Application Instructions General: The primed surface must be clean and dry. Allow tack coat to "flash off" 15 to 45 minutes. However, over time, a build up of. Mixing & Reduction Spray: Mix by volume one part Awlgrip Topcoat Base Component with one part Awlcat #2/G3010 Spray Converter to a smooth, homogenous mixture. Spray applying certain colors may require 4 or more coats to obtain full hide (opacity) or color coverage. Coats two and three are not "full, wet" coats. Do not apply G3005 over white or pastel colors. For standard conventional spray application this can be attained by adding up to 25% reducer using the correct spray reducer(s) appropriate for conditions. Smooth sanding until all of the "guide coat" is removed indicates a texture free surface. H3002, 1.3- 4 oz. Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended. Surface Preparation For best results AWLGRIP colors should be applied over properly prepared 545 Epoxy Primer, 345 HS Primer or in brush/roller applications Awlquik Primer. Sanding between coats with 320-400 grit paper will provide a smoother finish. Do not apply G3005 directly to bare wood. Then apply the second coat as an almost full wet coat. G3010, 4 oz. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz.

Key Features

• Allow tack coat to "flash off" 15 to 45 minutes.
• Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat.
• Overall mix is 2:1:⅓-1 by volume (8 oz.
• For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz.
• Sanding between coats with 320-400 grit paper will provide a smoother finish.
• Do not apply G3005 directly to bare wood.