Amana 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x

Description

Maximum RPM 16,000. With the optional 3/8" bearing, it will produce a fillet at the cut's edge. Good choice for handrails. Bit will produce a fillet if set to cut deep enough. Eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail simultaneously with these bits. Amana 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x 2-9/16 D x 3/4 CH x 1/2" Shank w/ Lower BB Ro Cuts a shallow ogee into the tabletop surface coupled with a bead at the edge. See also handrail patterns. Originally designed for easing and profiling the edges of tabletops, these bits also are widely used for the same purpose on handrails. These special router bits are used for cutting table top edges or used with handrail side profile bits. Optional 3/8" bearing #47702 (order separately).

Key Features

• With the optional 3/8" bearing, it will produce a fillet at the cut's edge.
• Bit will produce a fillet if set to cut deep enough.
• Amana 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x 2-9/16 D x 3/4 CH x 1/2" Shank w/ Lower BB Ro Cuts a shallow ogee into the tabletop surface coupled with a bead at the edge.
• These special router bits are used for cutting table top edges or used with handrail side profile bits.
• Originally designed for easing and profiling the edges of tabletops, these bits also are widely used for the same purpose on handrails.
• Eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail simultaneously with these bits.